Order Code

Description

Paper

T5750

Direct Thermal 57x50x11.5

Model: CBM270 and CBM272

Printing method

Line thermal dot printing

Printing width

48 mm (384 dots/line)

Printing speed

Max.50mm/sec. (400 dotline/sec.)

Number of columns

Font A: 32 columns.
Font B: 42 columns.

Character size (W ×H)

Font A: 1.25 × 3.00 mm (12 × 24 dots)
Font B: 0.88 × 3.00 mm (9 × 24 dots)

Dot pitch

8 dots/mm

Bar-code type

UPC-A/E, JAN (EAN), ITF, CODABAR, CODE39, CODE128

Line spacing

4.23mm (1/6 inch), can be set by a command (Min.1/203 inch)

Paper

Thermal roll paper: 58 × ø83mm (max.) Thickness: 60 ~ 75 µm

Interface

Parallel: Centronics
Serial: RS-232C

Input buffer

2K bytes

Power supply

DC 7.2V 2A (Peak 6A) or AC adapter AC 100 ~ 240V (27 AD)

AC adapter

Input: AC100~240V, 50/60Hz, 1.3A
Output: DC24V, 2.0A

Weight

CBM270 Approx. 0.6 Kg : CBM272 Approx. 0.7 Kg

External dimensions
(W ×D ×H)

CBM270: 106 × 184 × 110mm
CBM272: 106 × 183 × 126mm

Reliability

Head: 50,000,000 pulses or 50 km

Safety standard

FCC class A, TUV-GS, CE marking

Battery Statistics

Battery Pack 7.2VDC, 1650mAh
NiMH (Pack of 6 AA Drycells)
Charging time: Aprox 6 Hr to full Charge
Charging Monitor: Red Light while charging
Light goes off when charged
Recharging cycles: over 300 cycles
Charger: Built in
Discharge control: Low voltage alarm
No. of Printable lines: Approx 20.000 lines
(Contineuos sliding print of ANK Characters
at print tone level 2 & at room temp.
Power save mode:
Enters power save mode after 10 min
then Auto power off after another 10 min
timer intervals Dipswitch controlled
Power save mode disabled when
connected to mains power via adapter